How to Build Your Own Cantilever Sliding Gate

Building a quality cantilever sliding gate by yourself is possible. Although the process is a little technical, with the right DIY approach you should get it done in no time. The welding part, in particular, will require a lot of attention. First, you need to understand the difference between MIG welding and ARC welding. An ARC welding approach is highly recommended for home projects. This is because an ARC welding machine can easily plug into any outlet just like a normal appliance. You can also get professional fencing Anchorage in case you need additional help. Once the welding is sorted then the other steps are easier.

Building the Frame

Make sure that the entire gate is constructed on the ground. You need to start by putting together the frame. Ensure that all metal parts are properly fastened. This is because a solid frame is absolutely necessary to avoid any issues. There is a concept in welding called parallel clamping. It is used by professional Anchorage fence companies to fasten metal parts and it will work very well in your metal frame.

Setting the Frame

Once the frame is fully welded together and it’s strong enough, it’s time to hang it on the posts. Remember that your sliding gate will need a supporting frame for it to work. The frame is not that heavy but it requires a sizable amount of force to lift it and put in place. If you are struggling to set the frame on your own, you can get some help. Make sure you’ve also cleared the space around the gate to avoid any obstruction. This is the most important stage in building the cantilever gate. If the frame is not constructed and set in place properly, the entire gate system will be dysfunctional.

Testing

The frame is designed to roll perfectly on the cantilever roller. When you test the frame, check its movement on the rollers. It should be smooth. You should not use a lot of force to open or close it. If there is some resistance then there could be something wrong. Most of the time, this can be caused by a defective frame or a poorly set pole. Fix these issues and then test again. Repeat this process until the frame rolls smoothly.

Important Tips

There are also a few tips that you need to keep in mind.

-Take your time with this project.
-Learn a thing or two about welding. You will really need it.
-Getting professional help is encouraged. If you don’t know something, feel free to ask.
-Get the right tools. This is a very technical job, especially when it comes to measurements. The right tools will help you get everything right from the start.

Building your DIY cantilever sliding gate is possible. All you need is the right DIY guide, the required tools, and a few hours of your time. Make sure you also get a welder for the job.