How to Change the Colour of Oak Wood Cabinets
If youneed them lighter and’re not pleased with the color of your oak cabinets, you must strip the old finish off. Liquid stains and gel adhere to surfaces that etched have been cleaned and scuffed. 1 coating of stain and one or two of clear finish, along with your cabinets will look just like new.
Remove all of the doors along with the hardware, with a screwdriver or a drill using a No. 2 Phillips bit. Move all of the things within the cupboard to the back.
Mix a solution of 1/2-cup trisodium phosphate per gallon of warm water and then wash the outsides of the doors and the cabinets , using 000 steel wool. It also etches the finish, and the powerful detergent solution removes dirt and grease and dulls the sheen.
Let the cabinets dry. Sand the finish with an orbital sander and sandpaper. You are not trying to remove the finish, though it’s okay if a few wears off. You’re merely scuffing the finish to give it enough”tooth” to consume blot.
Rub a blot of your choice. The color will be a combination of the blot and the cabinet colours, so it is best to test the blot on the cabinets on the inside of a door or any other inconspicuous place to guarantee you enjoy it. Gel stains would be the most easy to use for this procedure, however you can get good results using a blot.
Let the blot rest . Wipe off the excess with a clean rag, before it gets tacky. Wipe with the wood’s grain.
Paint onto a coat of clear finish using a paintbrush following the stain dries. If the cabinets have a lacquer finish, use a lacquer product. Otherwise, a polyurethane or use varnish finish. You can also spray varnish or lacquer . Spray it in a well-ventilated space, if you do and put on a respirator.
Wait to dry, scuff it using sandpaper by hand and apply another coat.
Let the cure for 24 to 48 hours before you reattach the hardware and then rehang the doors.